Sparco

Market Segments

Electronics

Electronics manufacturing requires floors that control electrostatic discharge and stay dimensionally stable under equipment loads. Sparco's ElectroShield conductive epoxy system, supported by epoxy primers and screeds, protects sensitive components and clean production environments.

  • Electrostatic discharge (ESD) control
  • Clean-room compatible finishes
  • Equipment load stability

Recommended Products

Epoxy Primer

Epoxy SF Bonding Primer #104

Epoxy-based bonding primer

Bonding primer classified in the manufacturer's Safety Data Sheet as an epoxy-based system. A full technical data sheet is available on request via the enquiry form.

EpoxyPolyurethaneWater-based Screed

Sparco 3-C Polyurethane Screed

Water-based polyurethane flooring screed

SPARCO 3-C Polyurethane Screed is a water-based with various coloured hybrid screed with good levelling and high chemical resistance system.

EpoxySolvent-freeESD ESD flooring

Sparco ElectroShield SL 110

Solvent-free conductive epoxy coating (ESD)

SPARCO ElectroShield SL 110 is a high performance, two- component, solvent free Epoxy flooring for electrostatic discharge (ESD) protected areas. This system combines an excellent chemical resistance and high mechanical strength ESD floor. It is an excellent choice for use as self-smoothing finish with permanent conductivity.

EpoxySolvent-free Primer

Sparco Epoxy Bonding Primer #100

Solvent-free epoxy primer

SPARCO EPOXY BONDING PRIMER #100 is a medium viscosity solvent free composition epoxy primer. Suitable to be applied on dry or damp surface. It is the ideal choice for concrete primers, asphalt surface primer and metal surface.

EpoxySolvent-free Floor coating

Sparcofloor #102

Solvent-free epoxy roller coating

SparcoFloor #102 is a 2-part solvent free high solid epoxy coloured coating that can provide a medium hard wearing, low maintenance, smooth gloss finish or slip resistant finish when broadcast with different aggregate grades.

Typical System Build-Up

A representative layered system for this segment, built from Sparco's primer, body and topcoat products.

Success Stories

Illustrative examples of how these systems perform in the field.

Illustrative project profile

ESD-Safe Flooring for a Semiconductor Assembly Line

A regional electronics manufacturer, Woodlands

The extended section now reads within the line's required conductivity range and matches the existing ESD floor.

480 m²Floor areaConductive epoxy buildSystem
Illustrative project profile

Levelling Screed for a Cleanroom Support Corridor

An electronics contract manufacturer, Tampines

Trolley movement through the corridor is now smoother, with no further reports of vibration-related handling issues.

260 m²Floor areaPrimer + levelling screedSystem
Illustrative project profile

Epoxy Roller Coating for a Component Storage Area

An electronics component distributor, Ang Mo Kio

Dust generation from the floor has dropped and the store now cleans down in a fraction of the previous time.

300 m²Floor area2-coat roller-applied epoxySystem

Talk to us about your Electronics project

Send us your floor plan, drawings or site photos and our technical team will recommend a complete system.