Market Segments
Process areas, bund walls and storage zones demand floors that stand up to spills, cleaning regimes and mechanical wear. Sparco's solvent-free epoxy systems and polyurethane screeds provide medium-to-heavy chemical resistance with seamless, easy-to-clean finishes.
Epoxy-based bonding primer
Bonding primer classified in the manufacturer's Safety Data Sheet as an epoxy-based system. A full technical data sheet is available on request via the enquiry form.
Water-based polyurethane flooring screed
SPARCO 3-C Polyurethane Screed is a water-based with various coloured hybrid screed with good levelling and high chemical resistance system.
Solvent-free epoxy primer
SPARCO EPOXY BONDING PRIMER #100 is a medium viscosity solvent free composition epoxy primer. Suitable to be applied on dry or damp surface. It is the ideal choice for concrete primers, asphalt surface primer and metal surface.
Two-component thixotropic epoxy repair adhesive
SPARCO EPOXY THIXOTROPIC COMPOUND is a high performance, two-component, solvent free adhesive and repair mortar. The adhesive paste with exceptional sag resistance for vertical and overhead applications; it combines an excellent chemical resistance and high mechanical strength repair. It creates an excellent choice for a smooth, uniform surface with compounds that fill voids, cracks, and joints. It forms a durable, moisture-tolerant bonds to wet concrete substrates.
Solvent-free epoxy roller coating
SparcoFloor #102 is a 2-part solvent free high solid epoxy coloured coating that can provide a medium hard wearing, low maintenance, smooth gloss finish or slip resistant finish when broadcast with different aggregate grades.
Two-component solvent-based polyurethane floor coating
Two-component solvent based polyurethane finishes consisting of blended polyester polyol resin with pigments and aliphatic polyisocyanate hardener. Retains its color and high gloss under strong ultraviolet condition. Provides both durable and decorative finish; excellent abrasion and chemical resistance. Benefits. Attractive colored floor. Increased abrasion resistance. Hygienic, easy to clean. Protects and dustproof Color Range. standard colors Standard Thickness. Applied thickness at 35 microns per coat Area of Use. Exterior industrial floors. Color and gloss retention required floors.
Solvent-based aliphatic polyurethane coating (two-component)
Sparcofloor PU 41 has an excellent abrasion resistance, non- yellowing. It has an outstanding weather and durability where it withstands high abrasion and good adhesion properties in wear, chemical resistance. It exhibits an excellent adhesion onto concrete, metal and other surfaces that had been mechanically prepared. low-dirt pickup, good wet hiding, and long-lasting finishes.
Self-smoothing, solvent-free epoxy flooring
SL 200 is a solvent-free, two-component epoxy flooring system that self-smoothing during application. It delivers high chemical resistance alongside exceptional mechanical strength.
A representative layered system for this segment, built from Sparco's primer, body and topcoat products.
Success Stories
A specialty chemicals tank farm, Tuas View
The bund has remained watertight through subsequent wash-down cycles with no reported lining failures.
A specialty formulation plant, Jurong Island fringe
The mixing room floor has resisted staining and pitting from routine spill exposure since the screed was laid.
A chemical distribution warehouse, Pioneer Road
Spill zones are now easier to spot and clean, and the coating has held its finish under daily pallet-jack use.
Products used
Send us your floor plan, drawings or site photos and our technical team will recommend a complete system.
